- TOP
- Pulse Heat (Hot Bar Reflow) Soldering
- Products
- Digital Force Indicator FG-500
Digital Force Indicator FG-500
Digital Force Indicator FG-500
FG-500 is a compact and lightweight pressure indicator compatible with the TEDS function (automatic sensitivity calibration function).
Automatic calibration is performed when the power is turned on, so measurements can be taken immediately without inputting calibration values.
This digital pressure indicator is useful for adjusting head pressure for resistance welding and soldering with pulse heat, and for pre-operation inspections.
Features
Data display function
Displays status of pressure in waveform, bar graph, and numerical values. Color LCD screen provides excellent visibility.The result of judging whether the applied pressure is over or under can be confirmed by the color change.
TEDS function (automatic sensitivity calibration function)
The system reads the information from the pressure sensor when the power is turned on and completes calibration automatically.
Manual input of rated output values is no longer required, by which setting errors are eliminated.
Data collection function
800 sensor data can be stored in the main unit's memory. It is also possible to save 8 graph data
Multi-power supply support
Selectable AA batteries or USB bus power.
Others
Disconnection check function
Peak hold function, etc.
Supplies Specifications
| Item | FG-500 | |
|---|---|---|
| Didplay | Indicator | 2.4" TFT color LCD display (00000 - ±99999) |
| Display Mode | Setting screen / indicated value digital display / graphic display / recorded data list display / static strain display | |
| Laugage | Japanese / English | |
| Terminal | Input | Round connector / terminal block (only one of the two can be connected) |
| Output | BNC connectir (D/A output) | |
| Zeroing Adjustment | Adjustment by long-press of the button | |
| Hold Function | Sample hold, peak hold, bottom hold, designated section hold (peak, bottom) | |
| Data Recording | Indicated Value | Max. 300 ※Contents：ID No., date and time, mode of recording, sensor value memory No.、indicated value |
| Graph Data | Max. 8 ※Contents：ID No., date and time, mode of recording, sensor value memory No., trigger mode, graphic waveform | |
| TEDS function | IEEE1451.4 class 2 mix-mode interface | |
| Power Source | AA battery, NiMH battery, USB bus power (Micro-USB B connector) | |
| Conforming Standard | CE, UKCA, FCC (Class A) | |
| Dimension （mm） | W85 x D140 x H35 (excluding protrusions) | |
| Weight | ≒ 320g (including battery) | |
・Specification and appearance are subject to change without notice.
＊Pressure sensors for FG-400 cannot be connected. Please purchase a sensor marked with (T)
| Item | TJ-1A(T) | TJ-20R(T) or TJ-20A(T) | TJ-100R(T) or TJ-100A(T) | TJ-500R(T) or TJ-500A(T) |
|---|---|---|---|---|
| Measuring Range | 0-10N | 0-196N | 0-980N | 0-4,900N |
| Critical Load | 20N | 294N | 1,470N | 7,350N |
| Accuracy | ±2％（of full scale） | |||
Sensor Tip Shape
Data Management Software FgDataPicker
Free PC software to manage data measured with FG-500.
In addition to saving measurement data in CSV format, saved graph data and numerical data can be checked.
Operating Environment
- System Requirements
Computer with Intel Core 2 Duo processor or higher.
2GB or more memory. - Supported OS
Windows 10 (32-bit and 64-bit versions)
Windows 11
Software can be downloaded from this site.
Data Management Software FgDataPicker Download Page
Please download the operation manual and Fg500Setup.exe.
Please read the instruction manual carefully before installation.
Cautions before the installation.
Install FgDataPicker before connecting to a PC via USB.
*By installing the software, you agree to the FgDataPicker Software License Agreement.
